RK50114A0001
Manufacturer product reference image
Potentiometers - 50mm Size Metal Shaft High-quality-audio Type RK501 Series
Key Specifications
| Complete manufacturer part number | RK50114A0001 |
|---|---|
| Manufacturer | ALPS Alpine |
| Description | Potentiometers - 50mm Size Metal Shaft High-quality-audio Type RK501 Series |
| Package / case | 50mm Size |
| Product category | Potentiometers |
| Number of operating shafts | Single-shaft |
| Number of resistor elements | Quad-unit |
| Control part orientation | Horizontal |
| Fixing method of bushing | Screw |
| Shaft types | Slotted |
| Length of the shaft | 30mm |
| Detent | Without |
| Total resistance | 50kΩ |
| Resistance taper | 15A |
| Dimensions | 50mm Size |
| Operating temperature range | -10℃ to +70℃ |
| Total resistance tolerance | ±20% |
| Rated power | 0.1W |
| Maximum operating voltage | 150V AC |
| Maximum attenuation | 120dB min. |
| Gang error | -100dB to 0dB 3dB max. (Applies only between R1 and R2 and between R3 and R4) |
| Insulation resistance | 100MΩ min. 500V DC |
| Voltage proof | 500V AC for 1 minute |
| Total rotational angle | 300°±3° |
| Rotational torque | 32±15mN·m |
| Stopper strength | 1.5N·m |
| Push-pull strength | 150N max. |
| Vibration | 10 to 55 to 10Hz/min., the amplitude is 1.5mm for all the frequencies, in the 3 direction of X, Y and Z and for 2 hours respectively |
| Operating life | 15,000 cycles |
| In stock | 7,418 pcs |
| Unit price | Request a quote |
| Lead time | To be confirmed |
Technical documentation and image source
Manufacturer source fields matched to the complete ordering code. Historical source captures may be used; this does not confirm current availability. Temperature scope follows the cited record. Package reference image is not a stock-lot photograph. Consult the datasheet for electrical limits and test conditions.
Manufacturer product reference image for 50mm Size. Confirm electrical pin functions in the datasheet. Actual lot appearance and top marking require current-lot confirmation.
Some exact-order specifications remain to be confirmed in the manufacturer documentation.